HK-8SS-A carriage's welding position is in the middle of its body.It is used in general welding, especially long horns of the welding.CO2 welding trolley is used in many fields such as ship, bridge, train, steel structure, petroleum industry and so on. It is suitable for welding many structures such as stiffened web plate, ribbed plate, cross position, boxing beam and so on.
Suitable condition
Constituent instruction
HK-8SS is made up of carriage body, guide wheel, torch handle, X-Y slide, torch wiggler and control box.
1.carriage body:It is the carrier of drive unit, including motor, planet reducer and driving wheel.Control panel: It can adjust all actions of carriage. Please refer to “explanation of control panel”.
2.hand grips:Please hold this hand grip when you carry the machine.
3.road wheel
4.Magnet clutch handle: when the handle is in the middle and up, the magnetic is off; when the handle is rotated to parallel whit the center line of the two drivers, the magnetic is on.
5.Fine-tuning device of torch: It is easily to use it to align the torch to weld.
6. X-Y moving slide:Use it to adjust the position of torch. In the process of welding, you can tune the torch up and down.
7. Guide wheel assembly: It rolls along the base metal surface and align the torch to the welding part.
8. Insulation baffle boards
9. Welding torch gripper: It is used to fix the torch. You can take down torch by it, when you want to repair or adjust the torch.
10. Cable bracket: It can hold the cable on tail and power cable.
Main technical parameter
1. size |
290×230×335 mm |
|
2. weight |
8.8 Kg |
|
3. Power supply |
AC220V / DC24V |
|
4. Power |
22W |
|
5. power |
10~25Kg |
|
6. Range of adjusting welding torch |
50~900mm/min |
|
7. Range of adjusting welding torch |
Up and down |
50mm |
left-right |
50mm |
|
Range of working angle |
±45° |
|
Swing angle |
10° |
|
Range of working angle |
360° |
Welding parameter
welding wire diameter welding parameter |
Φ1.2mm |
Φ1.4mm |
Φ1.6mm |
|
current(A) |
Down hand welding |
120-300 |
150-380 |
180-430 |
flush fillet welding |
120-280 |
150-320 |
180-380 |
|
horizontal welding |
120-280 |
150-300 |
180-330 |
|
voltage(U) |
|
|||
distance between nozzle and workpiece(H) |
|
|||
welding extension length(L) |
The length is about 10 times welding wire diameter. It is L=10d |
Contents of package
1. Body |
1set |
5. Fuse 3A |
3sets |
2. Regulated power supply DC24V |
1set |
|
1set |
3. Standard power cord 20m |
1set |
(M3、M4、M5、M6) |
1set |
4. 2Pcontrol wire of blowtorch 500mm |
1set |