Flat groove welding carriage

Flat fillet welding carriage

Pipe horizontal welding carriage

Vertical welding carriage

Double side welding carriage

Custom-made welding carriage

HK-9DC Strandard auto welding carriage

Our company’s multifunction angle weld trolley is wonderful. It has many functions. It can make the person, who isn’t proficient, do angle weld easily. Chief characters are following:Small capacity, low gravity center, lightweight, portable. High magnetism magnet increases dependability of operating and draft load to assure the machine operates smoothly.It can operate many machines on the base of increase dependability of operating and self-stop function.The guide transfer switch can make it move toward right/left. Guide equipment is screw lockage-on type. Guide wheel’s height can be modified by three methods New spacing switch system increases the limited height of distance plate. All of the top characters are wonderful on the aspect of “effective welding” and “operated by primary person”.

Send an enquiry

Video

Description

Control panel illustration

1） Power indicated lamp: When the power is on, the lamp is light.

2） Speed control knob: Increase speed when you revolute clockwise, decrease speed when

revolute anti-clockwise. Speed scale matches following speed chart: Adjust the welding

speed according to welding specifications.

scale	speed（mm/min）	scale	speed（mm/min）
3	200	9	970
4	330	10	1080
5	460	11	1180
6	590	12	1280
7	720	13	1380
8	850	14	1480

3） Stop button：Press down the button and the trolley stop walking. The selector switch can

control whether the welding stops.

4) Walking guide and power switch:

The switch is used to control welding guide and power.

5) Start button：Press down the button and the trolley begin to walk. The selector switch can

control whether welding begins at the same time.

6） Model select switch---there are three positions. The individual function is:

TEST：On this position, the feeder works. You can control arc starting/ retracting arc by your hands, then reset after release.

ARC ON：On this position, the normal welding begins. If you press down firing switch, the trolley starts to walk at the time of arc starting.

NEUT：On this position, if you press down start button, the trolley walks but the welding doesn’t start.

7） Magnet switch: When the switch is off, the magnetic is off and the machine can move easily.

Technical specification

Main technical parameter

Weight	9.8 Kg
Driving method	Four rubber rims driving
Hauling power	16 Kg
Running speed	50~~1500 (mm/min)
Tracking mode	Guide wheel type
Height of torch	Three chooses
Adjusting scope of torch	Horizontal angle: 40°～55° Up /down moving: 60mm Front/rear moving:60 mm
Torch	Bended welding torch or straight welding torch
Locked equipment of torch	Suit for bended welding torch or straight welding torch
Needed welding length	Front-end:127mm; end:127mm
Self-stop function	By spacing parts of front-end and after end
Size(lengthwidthheight)	285x255x265