HK-5C is an equipment that can be used for chopping or continuous horizontal fillet welding.The maximum running speed of the welding barrow at the time of non-welding is 1900mm/min.Then the hold type hand handle, the convenience moves device. There is device for runoff and the runoff time is 0-7S.The welding can be left or right, and there are inductive switches on both sides of the barrow, so when welding is finished, the barrow can automatically stop, this is convenient for one worker to operate several equipments.
Outside view
Composition illustration
The HK-5C is made up of the body of the barrow、X-Y gliding block、directive wheel、inductive switch in the torch、magnetron hand grip、and control casing and so on.
1. Driving part: the device for driving the barrow is composed of four rubber rims,angle gears, catena and rag wheels
2. X-Y gliding block: the device for adjusting the position of the torch, and fine turning for up 、down、 left and right.
3. Welding torch clip: the device for fixing the torch.
4. Directive wheel: the device that is rolling on the surface of the base mental as a guide to the correct welding position.
5. Magnetron hand grip: the device for the convenience of fixing and shifting the barrow .
6. Control casing: adjust all the actions of the barrow, there are details in the control panel illustration section.
7. Magnet: The permanent-magnet can prevent the barrow from getting away from the sealing wire.
8. Inductive stop switch: the barrow automatically stops when welding the end of the work piece.
Application circumstance
Main technical parameter
1. Weight |
8.5Kg |
||
2. Dimension |
320mm×230mm×290mm |
||
3. Power source |
DC 24V |
||
4. Shifting |
Four-wheel drive(Rubber rim) |
||
5. Speed of travel |
30~1900mm/min(Display on the nixie tube) |
||
6. Adjustable range of the torch |
Up and down |
60mm |
|
Font and back |
60mm |
||
Working angle range |
±45° |
||
Moving angle range |
±10° |
||
7. Operation function |
Choice of moving direction |
Left and right |
|
Setting of the speed of travel |
Display on the nixie tube |
Welding parameter
welding wire diameter welding parameter |
Φ1.2mm |
Φ1.4mm |
Φ1.6mm |
|
current(A) |
downhand welding |
120-300 |
150-380 |
180-430 |
flush fillet welding |
120-280 |
150-320 |
180-380 |
|
horizontal welding |
120-280 |
150-300 |
180-330 |
|
voltage(U) |
|
|||
distance between nozzle and workpiece(H) |
|
|||
welding extension length(L) |
The length is about 10 times welding wire diameter. It is L=10d |
Contents of package
NAME:Standard angle welding Auto carriage
MODEL NUMBER:HK-5C
Accessories:
1. Standard power cord 220V/20M one set
2. 2P torch control line 500mm one set
3. Fuse 220V/2A two sets
4. Inner hexagon spanner one set
5. Instruction book one set
6. Conformity certificate one set