English
中文
Español
русский
Portugal
العربية
français
Deutsche
日本語
Indonesia
“CG1-100H” gas cutting machine (two torches) is one of main products of our company. It is designed well and beautiful. We do technical innovations and optimizations for it based on “CG1-30”. This machine adopts new material, which improves the serviceability, durability heat-insulating property and practicability.Distributor adopts integral flame adjuster. You only need one time of adjusting preheat oxygen and cutting oxygen. In the next cutting, when you open the valve, the nature of flame doesn’t change.“Double-torch” machine can load two torches and cut at the same time. Also, you can use them to cut “V” or “X” groove.
1.Hoses:Oxygen hose, Preheating oxygen hose and cutting oxygen hose
2.Cross moving hand wheel: To adjust horizontal position of torch.
3. Cross moving gear rack
4. Vertical adjusting hand wheel of torch
5. Tip
6. Clutch hand knob: “STOP” is declutch; “START” is combine.
7. Thermal baffle: To prevent heat to diffuse into the inner of machine.
8. Motor. Changeover switch: To control the direction of machine, “stop” position is in the middle.
9. Fuel gas two-port valve: To adjust the flow.
10. Preheating oxygen two-port valve: To adjust the flow.
11. Cutting oxygen two-port valve: To adjust the flow.
12.Heavy punch：
13. Gas distributor: It has three blocks, “open”, “preheating”, “cutting”
14. Fuse
15. Main machine
16. Electric outlet
17.Adjusting speed knob: It can increase the cutting speed along “0” toward “10” clockwise, and decrease the speed along “10” toward “0” anti-clockwise.
18.Universal wheel：
Specifications
|
1.Weight |
21 kilograms |
|
Accessory |
7.8 kilograms |
|
2. Machine dimension |
435×210×240mm |
|
3. Speed control |
Silicon control |
|
4. Power source |
AC 220V±10％ 50HZ |
|
5. Cutting speed |
50～750/mm/min |
|
6. Cutting thickness |
5-100mm |
|
7.Groove angle |
0-45 degrees |
|
8.Diameteral of cutting circle |
ø200-ø2000mm |
|
9.Tip |
G02(acetylene),G03(propane) |
|
10.Motor |
DC 110V 50HZ 30W 4200r/min |
Contents of package
|
1. Body |
1 set |
|
2.Torch unit assemblage |
1 set |
|
3. Moving unit assemblage |
1 set（including left-right, up-down moving unit assemblage and gear rack） |
|
4. Tip |
6 pcs |
|
5. Heavy punch |
1 set |
|
6. Power wire |
1 pc |
|
7. Specification sheets and certificate of qualification |
1 pc each |
|
8. Gas-in connector /pressure cat |
1 set |
|
9. Ball-pane screw M4 |
2 pcs |
|
Standard accessory |
|
|
1.Cutting circle unit assemblage |
1 set |
|
2.convex guide rail |
2 pcs 1.8m/pc or grooved guide rail 1pc1.8m） |
Call us now toll free
+86-21-69597779
Follow Us
