English
中文
Español
русский
Portugal
العربية
français
Deutsche
日本語
Indonesia
"CG2-11G / D-P" series of hand-operated pipe cutting machine is suitable for fast installation and cutting of seamless steel tube, also suitable for field operation.The machine is equipped with two clamping device, which can adjust locking wheel position according to the steel pipe diameter. To process a batch of the same size of the steel tube, after the first installation and debugging of machine, you can quickly through the locking device installed on other same specifications of steel, to save the time needed for adjusting machine, and improve production efficiency.
Name and function of each section
1. Cutting torch 2. handle 3.Curved guide rail 4. clamping wheel
5. clamping device 6. clamping screw rod 7. driving wheel
CG2-11G-PI
|
1.Weight(body) |
：7.2 kg |
|
Accessory |
：1.5 kg |
|
2. Machine dimension |
：165×265×405mm |
|
3. Groove shape |
:I shape or V shape (Most angle is 45 degrees) |
|
4.Reset accuracy |
：1mm |
|
5. Diameter of cutting pipe. |
：80mm-150mm |
|
6. Cutting thickness |
:5mm-50mm(Standard torch) |
Contents of package
Carefully take the machine out of its case.
The contents of the standard package are shown below. Check them carefully before assembling the machine.
|
1.Standard pack |
|
|
1）Main body(The hand knobs on two sides are used to assemble backward. |
: 1set |
|
2）Standard torch unit assemblage |
: 1set |
|
3）Tip （G02 or G03 ） |
: 3pcs each |
|
4）Gas-in connector |
: 1set |
|
5）Connector of torch |
: 1set |
|
6）Specification sheets and certificate of qualification |
: 1pc each |
Call us now toll free
+86-21-69597779
Follow Us
