HK-100K tractor is automatic device. It can get wider welding seam after a time welding.You can adjust swing speed, swing angle, off-set position of centre and stopping time of left and right. It is suitable for various beads. The biggest speed is 1250mm/min in weldless
HK-100K is made up of body, control case, X-Y slide blocks, blowtorch holder, guide wheel and straight track.
1)Body: It is the driving device, which includes motor, planet reducing box, driving gear and track wheel.
2)Control casing: To control the movement of carriage. Please refer to control panel manual.
3)Cross device: You can use it in the process of straight welding (such as container case) to adjust the position of torch in case of moving track.
4)X-Y trimming slide blocks: It is convenient to adjust the blowtorch up and down or left and right.
5)Swing device: To execute various welding model.
6)Holder of blowtorch: It can hold the blowtorch and adjust the angle of blowtorch easily. Notice: Must not hold the conductive section, which may lead to short out or electric shock.
7)Plug seat of source: It is the plug seat of external electric cable, which is connected with earth wire.
Main technical parameter
1.weight |
8.4Kg(including wig-wag) |
||
2.size |
430mm×280mm×290mm |
||
3.swinging motor |
DC 24V |
||
4.Driving |
Driving of chain gear |
||
5.walking speed |
50~1250mm/min |
||
6. range of blowtorch |
Up and down |
40mm |
|
Left and right |
120mm |
||
Job angle adjusting range |
±60° |
||
Running angle adjusting range |
10° |
||
7.functions |
Walking direction |
Fore and after |
|
Swing speed |
0~100 |
||
Left-stop time and right-stop time |
0~2.5 s |
||
Swing angle |
±15° |
||
Off-set distance |
0~±8° |
||
8.swing model |
|
Welding technical parameters
welding wire diameter welding parameter |
Φ1.2mm |
Φ1.4mm |
Φ1.6mm |
|
current(A) |
Down hand welding |
120-300 |
150-380 |
180-430 |
flush fillet welding |
120-280 |
150-320 |
180-380 |
|
horizontal welding |
120-280 |
150-300 |
180-330 |
|
voltage(U) |
|
|||
distance between nozzle and workpiece(H) |
|
|||
welding extension length(L) |
The length is about 10 times welding wire diameter. It is L=10d |
List of package
Carefully take the machine out of its case.
The contents of the standard package are shown below. Check them carefully before assembling the machine.
1. |
Host machine |
1set |
2. |
Straight track(2m/pc) |
1pc |
3. |
Standard power cord 220V/16M |
1pc |
4. |
fuse 220V/2A |
2sets |
5. |
Inner hexagon spanner |
1set |
6. |
specification sheets |
1pc |
7. |
Certificate of qualification |
1pc |