Shanghai Huawei Welding & Cutting Machine Co., Ltd. Banner
Product Center
Big HK-6B Continuous / Incontinuous Interval welding carriage image
  • Small HK-6B Continuous / Incontinuous Interval welding carriage image

HK-6B Continuous / Incontinuous Interval welding carriage

HK-6B is an equipment that can be used for chopping or continuous horizontal fillet welding.The actual distance of welding/non-welding can be adjusted by the waved switch、controlled by the electric engine and displays on the  display screen. It can be used for accurate welding due to its homogeneous running speed and high degree of precision.. The maximum running speed of the welding barrow at the time of non-welding is 1000mm/min.Shift the magnetron hand grip can partly reduce the magnetism and it is easy to clean up wastes and shift the barrow. 

  • Description
  • Video
  • Technical specification

The HK-6B is made up of the body of the barrow、X-Y gliding block、directive wheel、inductive switch in the torch、magnetron hand grip、and control casing and so on.

  1. control panel:
  2. power socket
  3. Control box:
  4. X-Y gliding block: the device for adjusting the position of the torch, and fine turning for up 、down、 left and right.
  5. Torch clamp part: the device for fixing the torch.
  6. Torch
  7. Guide part: the device that is rolling on the surface of the base mental as a guide to the correct welding position.
  8. Inductive stop switch: the barrow automatically stops when welding the end of the work piece.
  9. Magnetron hand grip: the device for the convenience of fixing and shifting the barrow .
  10. Lift a hand handle.

Main technical parameter

1 Weight

6.9 kg

2 Dimension

260mm×260mm×264mm

3 Shifting

Four-wheel drive(Rubber rim)

4 Traction

16kg

5 Speed of travel

100~1000 (mm/min)

6 Rang for adjusting torch

1) Up and down

45mm

2) Font and back

45mm

3) work angle

44°~55°

4) processing angle

±10°

7 Setting of runoff time

O~7S

8 welding torch

bend or straight

9 welding torch locking device

applied to bend or straight torch

10 No welding length

the front:127 mm 

the end :127 mm

11 locate function

both end side is equipped with located witches

Welding parameter

                welding wire diameter

welding parameter

Φ1.2mm

Φ1.4mm

Φ1.6mm

 

current(A)

Down hand welding

120-300

150-380

180-430

flush fillet welding

120-280

150-320

180-380

horizontal welding

120-280

150-300

180-330

voltage(U)

  1. U=14+0.051
  2. 300A under  U=0.041+16±1.50
  3. above 300A   U=0.041+20±2.0

distance between nozzle and workpiece(H)

  1. Below 200A: H=10~15mm 
  2. 200~350A  H=15~20mm
  3. 350~500A  H=20~25mm

welding extension length(L)

The length is about 10 times welding wire diameter. It is L=10d

Contents of package

MODEL NUMBER:HK-6B

Accessories:

 

1. Body 

1set

2. Standard power cord 220V 

1set

3. Fuse(1A) 

1set

4. Inner hexagon spanner  (M5/M6) 

1 pc each

5. Specification sheets  

1set

6. certificate of qualification

1set

 

Product inquiry