Shanghai Huawei Welding & Cutting Machine Co., Ltd. Banner
Product Center
Big HK-5B Continuous / Incontinuous Interval Time Welding Tractor for Fillet Seam image
  • Small HK-5B Continuous / Incontinuous Interval Time Welding Tractor for Fillet Seam image
  • Small HK-5B Continuous / Incontinuous Interval Time Welding Tractor for Fillet Seam image
  • Small HK-5B Continuous / Incontinuous Interval Time Welding Tractor for Fillet Seam image
  • Small HK-5B Continuous / Incontinuous Interval Time Welding Tractor for Fillet Seam image

HK-5B Continuous / Incontinuous Interval Time Welding Tractor for Fillet Seam

HK-5B is an equipment that can be used for chopping or continuous horizontal fillet welding.The actual distance of welding/non-welding can be adjusted by the waved switch、controlled by the electric engine and displays on the  display screen. It can be used for accurate welding due to its homogeneous running speed and high degree of precision.. The maximum running speed of the welding barrow at the time of non-welding is 1900mm/min.

  • Description
  • Video
  • Technical specification

Outside view

Composition illustration

The HK-5B is made up of the body of the barrow、X-Y gliding block、directive wheel、inductive switch in the torch、magnetron hand grip、and control casing and so on.

1. Driving part: the device for driving the barrow is composed of four rubber rims,angle gears, catena and rag wheels

2. X-Y gliding block: the device for adjusting the position of the torch, and fine turning for up 、down、 left and right.

3.Welding torch clip: the device for fixing the torch.

4.Directive wheel: the device that is rolling on the surface of the base mental as a guide to the correct welding position.

 5.Magnetron hand grip: the device for the convenience of fixing and shifting the barrow .

 6.Control casing: adjust all the actions of the barrow, there are details in the control panel illustration section.  

7.Magnet: The permanent-magnet can prevent the barrow from getting away from the sealing wire.

8.Inductive stop switch: the barrow automatically stops when welding the end of the work piece. 

Application circumstance



  

Main technical parameter

1. Weight

8.3Kg

2. Dimension

320mm×230mm×290mm

3. Power source

DC 24V

4. Shifting

Four-wheel drive(Rubber rim)

5. Speed of travel

30~1900mm/min(Display on the nixie tube)

6. Adjustable range of the torch

(1)Up and down

60mm

(2)Font and back

60mm

(3)Working angle range

±45°

(4)Moving angle range

±10°

7. Operation function

Choice of moving direction

Left and right

Setting of runoff time

0~3.5 S

Setting of the speed of travel

Display on the nixie tube

Welding parameter

                welding wire diameter

welding parameter

Φ1.2mm

Φ1.4mm

Φ1.6mm

 

current(A)

downhand welding

120-300

150-380

180-430

flush fillet welding

120-280

150-320

180-380

horizontal welding

120-280

150-300

180-330

voltage(U)

  1. U=14+0.051
  2. 300A under  U=0.041+16±1.50
  3. above 300A   U=0.041+20±2.0

distance between nozzle and workpiece(H)

  1. Below 200A: H=10~15mm 
  2. 200~350A  H=15~20mm
  3. 350~500A  H=20~25mm

welding extension length(L)

The length is about 10 times welding wire diameter. It is L=10d

Contents of package

NAME:Continuous/discontinuous automatic welding barrow

MODEL NUMBER:HK-5B

Accessories:

1. Regulated power supply DC24V                          one set

2. Standard power cord 220V/20M                          one set

3. 2P torch control line 500mm                             one set

4. Fuse 220V/2A                                         two sets

5. Inner hexagon spanner                               one set

6. Instruction book                                       one set

7. Conformity certificate                                   one set

 

Product inquiry