Shanghai Huawei Welding & Cutting Machine Co., Ltd. Banner
Product Center
Big CG1-2 H-beam Cutter image
  • Small CG1-2 H-beam Cutter image

CG1-2 H-beam Cutter

 “CG1-2A” portable H Structural section gas cutter is designed for cutting large-sized structural section. The cutter is constituted of web plate cutting mechanism, wing plate cutting mechanism, control box, gas distributor and torch. The shell of cutter is made of aluminum. Every section is connected with web plate cutting mechanism. The web plate mechanism is composed of box of reducing speed, motor and clutch. The web plate cutting mechanism walks on the track with four rollers. The wing plate cutting mechanism is installed on one side of the web plate and four pulley sustaining bars move vertically in the way that gear moves with gear rack. Design of the cutter is reasonable and the cutter is easy to check and repair. All operations are completed on the control panel such as quadruple switches, quick return push-button, speed modulation, power source switch. It is easy to master the operations even if freshman.

Video

  

Description

1. Torch

7. Quick distributor: Flame is adjusted only once and not adjusted again.

8.Handle: It is to move machine

2.Gas hose: connected between torch and gas distributor to deliver gas,

3. Adjusting pilot wheel for transverse: It is to control torch transverse movement.

9. Track pressure plate: Locate machine on the H structural section

4.Track

10. Clutch knob: Pulling knob on the left side is off, pulling knob on the right side is on.

5.Vertical moving bar

6.Reduce speed motor of web plate cutting equipment

 

Technical specification

Specifications

 

 

1.Weight (body)

:21.5kilograms

Accessory(track  sections)

:15.5 kilograms

2.Machine dimension

:400mm×340mm×440mm(Body);

: 270mm×220mm×2200mm(Track)

3.Speed control

:SCR control

4.Power source

: AC 220V±10%

5.Cutting speed

:50~750㎜/min

6.Cutting thickness

:5-50mm

7.Bevel angle

:0~30°( wing plate; web plate)

8.Maximum fly past of web plate cutting

:A=1600mm

9.Maximum fly past of wing plate cutting

: B=800mm

10.Maximum angle of wing plate slanting cutting

:30°(maximum height of slanting cutting 690mm)

11.Maximum angle of web plate slanting cutting

:35°(maximum length of slanting cutting 1300mm

12.Tip

:G02(for acetylene) or G03(for propane)

13.Motor                      

: 1) web plate motor 110V 50HZ 30W  

Rotational speed,3600 rpm

: 2) wing plate motor 110V 50HZ 40W 

 Rotational speed,2200 rpm

Contents of package

Body

1set    

Standard torch and sections

1set    

Wing plate mechanism

1  

Tip(G02 or G03)

3pcs

Track(include track pressure plate)

1   

Inlet gas joint 

1   

Spanner

Specification sheets and certificate of qualification

1

Power cable

1

M5 inner hexagon spanner

1

Phillips screwdriver

1

Needle

1  


Product inquiry